Battery Change - La Crosse Technology Weather Station Instruction Manual

Note:
In the event of changing batteries in any of the units, all units need to be reset by following the setting up
procedures. This is because a random security code is assigned by the transmitter at start-up and this
code must be received and stored by the Weather Station in the first 3 minutes of power being supplied to
it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units
(Battery life See Specifications below).
Please participate in the preservation of the environment. Return used batteries to an
authorized depot.
SETTING UP :
When one transmitter is used
1. First, insert the batteries into the Temperature transmitter. (see "Install and replace batteries in
the Temperature transmitter").
2. Immediately after and within 45 seconds, insert the batteries into Weather station (see "Install
and replace batteries in the Weather station"). Once the batteries are in place, all segments of
the LCD will light up briefly. Following the time as 0:00 and the indoor temperature and humidity
40