ZyXEL Communications P-661HNU-Fx Support Notes page 43

P-661HNU Series Support Notes
Configure an Internal Server behind SUA
Introduction
If you wish, you can make internal servers (e.g., Web, ftp or mail server)
accessible for outside users, even though SUA makes your LAN appear as a
single machine to the outside world. A service is identified by the port number.
Also, since you need to specify the IP address of a server behind the
P-661HNU-Fx, a server must have a fixed IP address and not be a DHCP
client whose IP address potentially changes each time P-661HNU-Fx is
powered on.
In addition to the servers for specific services, SUA supports a default server.
A service request that does not have a server explicitly designated for is
forwarded to the default server. If the default server is not defined, the service
request is simply discarded.
Configuration
To make a server visible to the outside world, specify the port number of the
service and the inside address of the server in Web Configurator, Advanced
Setup, Network Setting -> NAT -> Port Forwarding. The outside users can
access the local server using the P-661HNU-Fx's WAN IP address which can
be obtained from Web Configurator, Connection Status -> System Info ->
WAN Information.
For example:
Configuring an internal Web server for outside access (suppose the
Server IP Address is 192.168.1.10 ) :
(1) Fill in the service name and server IP Address, press button „Add new rule‟
43
All contents copyright © 2010 ZyXEL Communications Corporation.