Listen To The Demo Songs - Kurzweil RE-210 Owner's Manual

Hide thumbs Also See for RE-210:
Table of Contents

Advertisement

Turning on the Instrument (Power)
The RE-210 operates on AC power. A power cord is included with the instrument to connect it
to an AC Outlet. Before connecting the power cord, be sure that the power switch, located
under the left-hand end of the keyboard, is off. Then plug the power cord into an AC outlet.
Once the power cord is connected, you can turn the power switch on.
After the power switch is turned on, it will take about 2 seconds before the front panel lights
up. An additional 3 seconds is needed before it is ready to play.
Setting the Volume
To be sure that you can hear the instrument, move the Volume knob (on the left end of the
front panel) to the middle of its range. This should provide a reasonably comfortable level of
volume, which you can adjust if you wish the sound to be louder or softer.
12
Setting up the Instrument

Listen to the Demo Songs

The RE-210 contains a number of built-in demonstrations to acquaint you with
the sound and capabilities it possesses. To access these demonstrations, press the
D e m o button, which is located near the right end of the front panel controls, in
the Options section. The button lights up to show that the RE-210 is in the
demonstration mode.
To listen to the demo songs for the preset sounds
Press any button where the light rotates in the Sound Select or Left Split section
to hear a demonstration of the sound. The Variation button plays all demo
songs for preset sounds in a loop.To stop playing a song, press the currently
seleced button. The button lights resume their blinking pattern.
To listen to the Piano Demo Songs
There are 50 piano demo songs available. The number on the display indicates
the current song number that ranges from 1 to 50. Select a song by pressing the
U p / D o w n button. Press the Play/Stop button to hear the song. The Recorder
button plays all Piano demo songs in a loop. To stop playing a song, press the
Play/Stop button. The button lights resume their blinking pattern.
To exit demonstration mode, press the D e m o button again.
13
Listen to the Demo Songs

Advertisement

Table of Contents
loading

Table of Contents