Serial Number Locations; Chassis Number; Engine Number, Engine Type; Operation Instruments - KTM 640 LC4 SUPERMOTO 2003 Owner's Manual

Table of Contents

Advertisement

1
1-3 mm
2

SERIAL NUMBER LOCATIONS

Chassis number

The chassis number is stamped on the right side of the steering head tube.
Write this number into the relevant area on page 1.

Engine number, engine type

The engine number and engine type are stamped on the right hand side of
the engine below the chain sprocket. Write this number into the relevant
area on page 1.

OPERATION INSTRUMENTS

Clutch lever

The clutch lever
1
is fitted on the left hand side of the handle bar. When
engine is cold, there should allways be a play of 1–3 mm (0,04–0,1 in) at
this lever (measured at outer edge).

Hand decompression lever

The hand decompression lever
a) When the engine stalled.
It is possible that the starter motor is not able to crank the engine on the
next attempt. This is due to the fact that the automatic decompressor
doesn't work properly. If this happens, pull the manual decompression
lever and start again. Afterwards normal starting will be possible.
b) When you want to push the motorcycle.
While pushing, pull the hand decompression lever to make it easier to get
the engine going.

Hand brake lever

The hand brake lever is mounted on the handlebar on the right and
actuates the front wheel brake.
2
is only used in two special cases:
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2003 640 lc4 enduro

Table of Contents