Clarion NX702E Owner's Manual page 9

Names of Buttons
[MAP PWR] Knob
• Press to power on the system when
ignition on.
• When power on, press to enter navigation
mode.
• Press and hold this key more than 1
second to turn off the system.
[MENU ALL] Button
• Short press to show/exit shortcut menu.
• Long press to show/exit main source
menu.
[ - , + ] buttons
• Press to decrease or increase the volume.
Speaker Setting Mode
When power on first time, "Speaker Setting
Mode" dialog appears.
1. Select "Initial settings", all speaker settings
return to default setting.
3 Memory of previous speaker mode are
deleted.
Touch [OK] on the dialog box, then select
a mode.
2. Select "Load settings", currennt speaker
settings are kept.
The way of SENSOR control (
8
NX702E
[MIC] Hole
• Internal microphone
[RESET] Button
• Press to load original settings.
Note: When the [RESET] button is pressed,
frequencies of radio stations, titles, etc.
stored in memory are cleared.
[OPEN] Button
• Press to slide down the panel.
[ ] EJECT Button
• Press to eject disc.
3. Speaker Setting Mode
Normal
mode
3Way multi
mode
2Way multi
mode
/ + / - )
MUTE
VOL UP (1 degree)
VOL DOWN (1 degree)
MENU (long press)
Front L,R
Rear L,R
Subwoofer L,R
MID L,R
HIGH L,R
Subwoofer L,R
MID L,R
HIGH L,R
REAR L,R