Control Panel; Crushing Ice - Hamilton Beach 840071000 User Manual

Control Panel

Depending on the model, your blender
controls may range from 7 to 14
speeds. If your blender control panel
has blending functions listed above
and below a row of buttons, first select
the LO or HI power range before
pushing a Function Button.
Features called Ice Breaker, Pulse,
or InstaBlend indicate an option of
blending only as long as the button is
held down. The blender motor stops
when the button is released. Do not
attempt to hold down these buttons
down continuously.
This blender has a three position
LO/HI/ICE BREAKER switch. Slide
the switch towards LO to select the
LO power range. The middle position
of the switch is the HI power range.
To operate the blender, first select the
LO or HI power range. Then select the
speed by pushing one of the speed
buttons. The blender will run until the
OFF button is pushed.

Crushing Ice

Fill container half-full with cold water.
Add about 2 cups of ice cubes.
Place cover on container then press
and release the Ice Breaker button.
Continue until ice is crushed to desired
consistency. Pour contents into
colander or sieve to drain off water.
6
Ice Breaker/Pulse
This function allows instant control
of the blending action. The blender
operates only as long as the switch
is held. Slide the switch toward
Ice Breaker for instant on and off
pulsing action.
DO NOT CRUSH ICE WITHOUT
LIQUID. Failure to follow these
directions can result in damage to
the blades, container, blender, and
possibly result in personal injury.