Kenmore 79041283000 Installation Instructions Manual page 5

If theappliance
is used in a new branch circuit
installatlon (1996 NEC), mobile home, recreational
vehicle, or where local codes DO NOT permit
grounding through the neutral (white) wire, the
appliance frame MUST NOT be connected to the
neutral wire of the 4-wire electrical system.
if your cooktop has a 3=wlre cable (see figure 6):
1. Disconnect the power supply.
2. Separate the green (or bare copper) and white
appliance cable wires.
3. Cap the white wire from the power supply cable if a
3-wire appliance cable is supplied.
4. In the circuit breaker, fuse box or junction box:
connect appliance and power supply cable wires as
shown in figure 6.
Ground Wire
Red
Wires
Cable from Power Supply
.White Wire
Black
Wires
Junction Box
Ground Wire U.L.-Listed Conduit
(Bare or Green Wire) Connector (or CSA
listed)
Cable from appliance
Figure 6
4-WIRE GROUNDED JUNCTION BOX
if your cooktop has a 4 wire cable (see figure 7):
1. Disconnect the power supply.
2. Separate the green (or bare copper) and white
appliance cable wires.
3. In the circuit breaker, fuse box or junction box:
connect appliance and power supply cable wires as
shown in figure 7.
Cable from Power Supply
Ground Wire
Red
White
Wires
-- Black
Ground Wire
(Bare or Green
Wire)
Conduit
Junction Box Connector (or CSA listed)
Cable from appliance
Figure 7
Models 36" with Wormer Zone
4=WIRE GROUNDED JUNCTION BOX
if connecting to a 4=wlre power supply
cable electrlcal system, the appliance frame connected
ground wire MUST NOT be connected to the neutral
wire of the 4=wlre electrlcal system.
5