Loading The Battery Pack - Hitachi MpegCam MP-EG10W Instruction Manual

Loading the Battery Pack

Load the battery pack in the MP-EG10W by the following procedure:
1
Open the battery compartment lid.
Press the BATT. EJECT button downward. The
battery compartment lid will open.
2
Load the battery pack.
Load the battery pack in the direction of the arrow
until it is fixed securely.
3
Close the battery compartment lid.
* If the battery pack is not inserted correctly, the
lid will not close completely. If this happens,
re-insert the battery pack correctly.
Removing the battery pack
Press the BATT. EJECT button downward to open
the lid and push the lever in the direction of the
arrow. The battery pack will be ejected by spring
force.
* Do not drop the battery pack when removing it; this
could result in malfunction.
* Do not remove the battery pack during recording or
playback. If it is removed during recording, file will
not be recorded.
___________________Chapter 2 Set-up
BATT. EJECT button
Battery compartment lid
Lever
E21