On-Screen Display And Basic Operation Of Media Navigation - Hitachi MpegCam MP-EG10W Instruction Manual

On-Screen Display and Basic Operation of Media Navigation.

There are two basic screens for Media Navigation - the FOLDER select screen, which dis-
plays file number list in folders, and the file select screen, which displays a list of files.
Following are details of the displays on these screens and the basic operation methods.
Details of display on FOLDER select screen _______________
This screen allows you to select a folder which contains files you want to operate. After selecting a folder, you can go
on for auto play, repeat, slide, free (remaining) memory, lock/unlock, transfer, copy, deletion, etc.
FOLDER Select Screen
Folder (0-5)
Basic operation on folder select screen __________________
Use the buttons shown below corresponding to
following text. You can use the remote control to operate in the same
way.
s: PLAY button
: R.SEARCH button
: F.SEARCH button t: STOP button
To select a folder:
Press or to move the highlighted section up or down and select a
folder.
To select multiple folders:
Press the MACRO/SHIFT button so that
of the screen, and then press the or
Press MACRO/SHIFT again to release
______Chapter 4 Using Media Navigation (Playback)
Symbol showing a moving picture file
Symbol showing a still picture file
, s and t in the
,
SHIFT appears at bottom left
button to select folders.
SHIFT
.
Symbol showing a still picture with audio
* You can see six folders and the
number of files in each folder on this
screen.
* The recorded files are stored in folder
0 (non-identified folder).
File numbers of moving picture, still
picture and still-with-audio files in each
folder
F.SEARCH
STOP PLAY
R.SEARCH
Folder being selected
Highlighted section
E43