Hitachi CP-AW2519N Manual page 215

7. Other Functions
7.3 Event Scheduling(Continued)
Date/Time Settings (
The Date/Time setting can be adjusted via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address bar of the web browser.
2) Enter your user name and password, and then click the [OK].
3) Click the [Date/Time Settings] on the main menu and configure each item.
Refer to item 3.8 Date/Time Settings (
4) Click the [Apply] button to save the settings.
NOTE • The battery for the built in clock may be dead if the clock loses time
even when the date and time have been set correctly. Replace the battery by
following the instructions on replacing the battery.
( Replacing the internal clock battery in the User's Manual (concise))
• The internal clock's time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
84
59)
59) for further information.