American DJ Fusion Scan 250 EX User Instructions

User Instructions
Rev. 10/09
American DJ
®
6122 S. Eastern Ave.
Los Angeles Ca. 90040
www.americandj.com
Fusion Scan 250 EX™
Unpacking:
Thank you for purchasing the Fusion Scan 250 EX™
by American DJ . Every Fusion Scan 250 EX™ has been thoroughly
®
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all equipment necessary to oper-
ate the unit has arrived intact. In the event damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your
dealer without contacting customer support first.
Introduction:
The Fusion Scan 250 EX™ is a six channel, DMX intel-
ligent fixture. The fixture can used in two different operating modes;
Sound Active or DMX controlled. The Fusion Scan 250 EX™ can be
used as a stand alone fixture or used in multiples linked in a master/
slave configuration. For best results use fog or special effects smoke to
enhance the beams projections.
Customer Support:
American DJ
support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
American DJ - www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 2
®
General Information
provides a toll free customer
®