Operation - American DJ X-Move LED Plus R User Instructions

X-Move LED Plus R
tures home position.
1. Press the ENTER button for at least 5 seconds to enter into
offset mode.
2. Press the UP or DOWN buttons until "OTIL" is displayed, and
press ENTER. The display will begin to flash.
3. Press the UP or DOWN buttons to adjust to your desired
home position. Once you have found your desired position
press the ENTER button to set and save, or press the MENU
button to return to return to offset functions without any
changes. If you do not press any buttons for 8 seconds the
fixture will return to the offset functions automatically.
American DJ - www.americandj.com - X-Move LED Plus R Instruction Manual Page 13
®
System Menu X-Move LED Plus R
Operating Modes: The X-Move LED Plus R can operate in
three different modes. In each mode you can run the fixture as
a stand alone fixute or in a master/slave confiugration. This next
section will detail the differences in the operating modes.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• Show mode -
The fixture will run one of four shows that you choose.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
Designer.
Master-Slave Operation
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressiing the ENTER button.
3. On the slave units
played, and Press ENTER. Choose either
press ENTER. See page 10 for more info.
4. The slave units will now follow the Master unit.
Universal DMX Control:
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The X-Move LED Plus R is a nine DMX channel DMX fixture. See
pages 16-17 for detailed description of the DMX values and
American DJ
™
This function will allow you to link up to 16
tap the MENU button until "SLND" is dis-
This function allows you to use a Elation
- www.americandj.com - X-Move LED Plus R Instruction Manual Page 14
®

Operation

Show
®
"SL 1" or "SL 2" and
®