Genesis Technologies GT-3.0 Operation Manual page 21

CLOCK
E
TO change clock settings press and hold CLOCK/Band key
for 3 seconds. Press Volume up or down to adjust Hours.
Press the Audio key then Volume up or down to adjust
Minutes. Refer to page 12 for clock setting adjustments.
A, B and C Rooms
F
Turns sound on or off in the corresponding rooms A, B or C.
0-9 NUMBERS
G
Radio Mode: You can select one of the 9 stored stations on
each band by pressing any one of the number buttons (1-9).
Disc Mode: You can select any track directly by using the
number buttons (0-100+). Example: If you want track
number 25. Consecutively press the number 2, then 5 and
track number 25 will begin to play.
100+
H
Radio: N/A
Disc: Press the 100+ button to select tracks numbered
higher than 100 on MP3s.
PROGRAMABLE BUTTONS
I
The GT-3.0 button sets remote functions to the GT-3.0
Radio. This is the default. Three other buttons have learning
ability. The learning procedure is explaind in Remote
Memorizing, page 26-27.
VOLUME
J
Press the "VOLUME" (+ or -) button to increase or
decrease the volume level respectively.
MENU / DISPLAY
DISC only. Selects upper menu. Press the button for 3 sec-
onds to display the status of the DVD or CD that is currently
playing.
CD/VCD/DVD Mode: Press the "DISPLAY" button and the
GT-3.0 Display Screen and attached Video Monitor will
show single track elapsed time, single track remaining time
or entire disc time, It also shows the track being played and
the amount of the whole disc.
MP3 Mode: Press the "DISPLAY" button and the OSD will
show single track elapsed time only.
NAVIGATION BUTTONS
L
Press the appropriate button to move around any menus
that are selected on screen. Center button is the "select /
enter" button.
21