Placing A Call - Gt3.0 - Genesis Technologies GT-3.0 Operation Manual

PLACING A CALL - GT3.0

Placing a call with the GT-3.0
Using the Radio buttons
To place a call using the GT-3.0 with a paired Bluetooth
abled cell phone first enable the GT-3.0 Bluetooth
pressing the "MODE" button or by pressing the "Bluetooth
button above the SD slot until "BT" and "LINK OK" appears on the
GT-3.0 display. Using the GT-3.0 keypad dial the desired phone
number. Press the button marked "NEXT" to initiate the call.
To end the call press the button marked "PREVIOUS".
To redial the last call press the button marked "NEXT".
Receiving a call with the GT-3.0
Using the Radio Buttons
To receive an incoming call while the GT-3.0 is paired with
Bluetooth ® enabled cell phone press the button marked "NEXT".
To end the call press the button marked "PREVIOUS".
Special dialing GT-3.0 keypad functions
To clear an entry press the button marked VIDEO SETUP
To type star (*) press the button marked F FWD
To type pound (#) press the button marked F RWD
MODE
OR
en- Press the
®
"MODE" button
mode by
®
or press the
"
®
"Bluetooth
button
NEXT
Press the button marked
"NEXT" to receive an
incoming call.
VIDEO SETUP
To clear an entry press
the button marked
VIDEO SETUP
18
1
NEXT
Use keypad Press the button
dial the desired marked "NEXT"
phone number to initiate the call.
"
®
PREVIOUS
To end the call press
the button marked
"PREVIOUS".
F FWD
To type star (*)
press the button
marked F FWD
PREVIOUS
To end the
call press the
button marked
"PREVIOUS".
F RWD
To type pound (#)
press the button
marked F RWD