JVC LT-32FXD7 Instructions Manual page 31

Operation with the DTV menu
ENTER PIN CODE
You can change the pin code, and its purpose is allowing to
enter the system of locking certain channels in EDIT PR LIST
menu.
1 Press the ▼/▲ buttons to choose ENTER PIN
CODE, and then press the OK button.
2 Press the number buttons to enter current pin
code.
The default factory pin code is "0000".
3 Enter a new PIN CODE in both of change pin
code and confirm pin code.
Your newly chosen PIN CODE is now set. You will
now need to use the new PIN CODE to lock or unlock
certain channels through EDIT PR LIST.
I-PLATE SETUP
The programer information setting can be adjusted.
1 Press the ▼/▲ buttons to choose I-PLATE, and
then press the OK button.
2 Press the ▼/▲ buttons to choose an item and
then press the
settings.
I plate Display:
This function is to turn on and off displaying I-PLATE
when changing channels.
Display Time:
This function is to display in time for I-PLATE from 1
second to 20 seconds.
Time Format
This function is to choose "24H" or "AM/PM" time
format.
3 After the settings are done, press OK button.
Then, press the
or not, then press the OK button.
buttons to choose your
buttons to choose save
29