Table of Contents
Advertisement
Charge the Battery
1)
Unpack the handset, battery pack, and battery cover.
If the battery cover is already on the handset, press in
on the notch and slide the cover down and off.
5)
Connect the AC adapter to the charger's
jack and set the plug into
AC IN 8V
the notch as shown. (This adapter
might already be connected.)
6)
Plug the other end of the adapter into
a standard 120V AC power outlet.
7)
Place the handset in the charger with
the display facing forward. The
light should turn on.
ChArge
2
Installing Your Handset
If...
Try...
-
the
ChArge
-
light does not
turn on
-
Charge the handset completely (about 15 hours) before using
it.
2)
Line up the red and black wires on the
battery pack with the label inside the
handset.
3)
Push the battery pack connector in until it
clicks into place. Tug gently on the wires
to make sure the battery pack is securely
connected.
4)
Place the cover over the battery
compartment and slide
it up into place.
reseating the handset.
checking the AC adapter connection.
seeing if the outlet is controlled by a wall switch.
Advertisement
Table of Contents
