Charge The Battery - Uniden DECT 1705 Owner's Manual

INSTALLING YOUR hANDSET

Charge the Battery

1. Unpack the handset, battery pack,
and battery cover. If you need to
remove the cover, press in on the
notch and slide the cover down and
off.
2. Line up the battery connector with the
jack inside the handset; the connector
only fits one way.
3. Push the connector in until it clicks
into place; tug gently on the wires
to make sure the battery is securely
connected.
4. Replace the battery cover and slide it into place.
5. Use the AC adaptor to connect the power jack on the charger to a
regular indoor (240V AC) power outlet.
6. Place the handset in the charger with the display facing forward. If the
display doesn't light up, reseat the handset or connect the charger to
a different outlet.
#
Charge the handset completely (about 15 hours) before using it.
4