SPECIFICATIONS
Type
Speaker Unit
Input Terminal
Maximum Amplifier Power Output
Cut-off Frequency
Sound Pressure Level
Level Control
Power Requirement
Mass
Design and specifications are subject to change without notice.
SUPPLIED ACCESSORIES
Speaker input connector 4P
Stay
Tapping screw
Insulation tape
Active Subwoofer System (Built-in amplifier)
30 cm (11-13/16 inch) cone
LINE IN (1 system), 0.18 V – 4 V
SPEAKER (1 system), 3.9 V – 12 V
350 W
50 Hz – 300 Hz (b12 dB/oct. low pass filter)
110 dB/ m (with line input: 0.03 V)
b50 dB to a 6 dB
Center: 0 dB
DC 14.4 V (11 V to 16 V allowance)
Negative ground
18.8 kg (42 lbs) (Excluding accessories)
200 mm (7-7/8 inch) c 1
c 4
ø4 mm c 16 mm (Dia. 3/16 inch c 21/32 inch)
c 1
(Including cord)
c 8
6