Finish Washing; Disposal After Washing - Haier XQJ100-96 User Manual

The pulsator will not rotate unless the water is filled to selected water level.
Do not use the SOAK program for the woolen laundries.
8 The washing is finished

9 Disposal after washing

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise
it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
The filter screen of the water inlet valve is
likely to be blocked by foreign materials
and influence the water inlet. Please clean
it with brush every two months.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely
after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid
for some time (about 1 hour), then close the top lid.
Attention
The power will be switched off automatically
after the finishing of the washing.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol,
alcohol etc.
l
P e t r o
T h in n e r
Alcohol
It beeps to indicate
the finishing of
washing