Copying/Moving Still Image Files - JVC GZ-MG130AA Instructions Manual

Copying/Moving Still Image Files

You can copy or move still image fi les
between the HDD and SD card using the on-
screen display.
Preparation:
•
Slide the power/mode switch to MODE to
select mode.
•
Press the PLAY/REC button to select
playback mode.
•
Make sure that SD card is inserted in the
SD slot.
•
Make sure that enough free space is left in
the copy/move destination medium.
1
FUNCTION
2
Select [COPY] or [MOVE].
•
[COPY]:
Files are copied to the destination
medium while leaving original fi les in the
source medium.
•
[MOVE]:
Files are moved to the destination
medium while deleting original fi les
(except read-only fi les) in the source
medium.
Select
Set
3
Set the direction of copy/move.
(HDD ] SD or SD ] HDD)
DELETE
PROTECT
COPY
MOVE
DPOF
EFFECT
IMAGE COPY
MEDIA HDD SD
FILE UNIT ALL
0059
NUMBER OF FILE
EXECUTE
CANCEL
SELECT SET QUIT
4
5
Set the fi le unit ([ALL] or [FILE]) to
copy/move.
•
[FILE]:
Select when you want to transfer the
selected fi les.
1) Move the set lever to
to select the desired fi le, then press
down.
•
The mark appears on the fi le. To
select other fi les, repeat this step.
2) Press FUNCTION.
•
[ALL]:
Select when you want to transfer all fi les
in the recording medium.
6
Select [EXECUTE].
Select
Set
File transfer starts. When [COPYING/
MOVING COMPLETED] appears, press
down the set lever.
8 To exit the screen
Press MENU, then move the set lever to
/ to select [EXECUTE] and press
down.
8 To stop the fi le transfer
1) Press down the set lever.
2) Select [EXECUTE] and press down the
set lever.
/ / /
45