Honda 2007 INTERCEPTOR VFR800 Owner's Manual page 119

Engine Oil & Filter
This procedure requires mechanical skill
and professional tools such as a torque
wrench and oil filter wrench, as well as a
means for disposing of the drained fluid
(page 180 ). If you do not have the skills
or the tools, see your Honda dealer.
Drain the Engine Oil:
1. Park your motorcycle on its center stand
on a firm, level surface.
2. If the engine is cold, start it and let it
idle for 3 5 minutes. Turn the engine
off. Wait 2 3 minutes for the oil to
settle.
3. Remove the lower fairing (page
and inner fairing (page
110
Servicing Your Honda
93 )
95 ).
4. Place a drain pan under the crankcase
drain bolt ( ). 1
5. To drain the oil, remove the oil filler
cap, crankcase drain bolt, and sealing
washer ( ). 2
LEFT SIDE
(2)
(1) crankcase
drain bolt
(1)
(2) sealing washer