Save & Exit - Gigabyte GA-J1900N-D3V User Manual

2-7 Save & Exit
Main Advanced
Save Changes and Reset
Save Changes and Reset
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
UEFI: USB 2.0 USB Flash Drive 0.00
UEFI: Built-in EFI Shell
Launch EFI Shell from filesystem device
& Save Changes and Reset
Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup
program. Select No or press <Esc> to return to the BIOS Setup Main Menu.
& Discard Changes and Reset
Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made
in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu.
& Restore Defaults
Press <Enter> on this item and select Yes to load the BIOS factory default settings. The BIOS defaults
settings help the system to operate in optimum state. Always load the Optimized defaults after updating
the BIOS or after clearing the CMOS values.
& Save as User Defaults
Save to current BIOS settings as user-defined default settings.
& Restore User Defaults
Load the user-define default settings for all BIOS options.
& Boot Override
Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes
to confirm. Your system will restart automatically and boot from that device.
& Launch EFI Shell from filesystem device
Allows you to launch the EFI Shell application (shell.efi) from one of the available filesystem devices. Press
<Enter> on this option and the system will restart to the EFI Shell screen automatically.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Chipset Security Boot Save & Exit
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
- 28 -
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit