Using Process; Preparation Before Washing - Haier WMS650 User Manual

Twin-tub washing machine with pump
Table of Contents

Advertisement

Preparation before washing

Pay attention to followings before washing the laundries
Check
if
C l e a r
the laundries
pocket. Take
has special
out the coins,
requirement
sand, hairpins
on washing
etc.
a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust.
For the parts with heavy soil, please apply detergent on them in advance, which
can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before
putting in.
f. Do not put those laundries polluted by chemicals into the washing machine directly.
t h e
Tie the long
strips; fasten
t h e b u t t o n s ;
close zippers.

Using process

Using process
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put down the drain hose.
4.Slanting or uneven ground may result in
unstable working or abnormal noise. Please
make the machine stand horizontally.
The quantity of
the
laundries
shall not be too
large.
Stretch
and loosen the
laundries before
putting them in
the tub.
When the pulsator
is running , the
buttons
of
the
l a u n d r i e s m a y
cause noise. For
t h e
s a k e
o f
discretion, please
put the laundries
with buttons into
other laundries.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xqb650

Table of Contents