Clearing All Mykeys; Checking Mykey System Status; Mykey Troubleshooting - Ford Fiesta Owner's Manual

All programmed keys can be cleared within
the same key cycle in which a key was
programmed, otherwise an admin key is
required to clear the keys. See Clearing
All MyKeys (page 32).
1. Switch the ignition on using an admin
key.
2. Press the MENU button, select MyKey
and press the OK button.
3. Use the left or right arrow button to
select an optional feature.
4. Press the OK or right arrow button to
scroll through the settings.
5. Press the OK or right arrow button to
make a selection.

CLEARING ALL MYKEYS

All programmed MyKeys can be cleared
within the same key cycle in which a MyKey
was created, otherwise an admin key is
required to clear the keys.
To clear all MyKeys (which removes all
restrictions and returns them to admin key
status), use the information display control
to do the following:
1. Access the main menu and select
MyKey.

MYKEY TROUBLESHOOTING

Condition
I cannot program a key.
I cannot program the optional settings.
MyKey
(If Equipped)
2. Scroll to Clear All and press the OK
button.
3. Hold the OK button until ALL
MYKEYS CLEARED is displayed.
CHECKING MYKEY SYSTEM
STATUS
Keys programmed to the vehicle are shown
in the information display:
• MYKEY MILES: Tracks mileage when
a restricted key is used. If mileage does
not accumulate as expected, then the
key is not being used by the intended
user. The only way to reset this to zero
is by resetting the keys. If the mileage
is lower than the last time you checked,
then the key system has been recently
reset.
• #MYKEY(S): Indicates how many
restricted keys are programmed to the
vehicle. Can also be used to detect
deletion of a restricted key.
• #ADMIN KEY(S): Indicates how
many admin keys are programmed to
the vehicle. Can also be used to detect
if an additional key has been
programmed to the vehicle.
The key in the ignition does not have admin
privileges.
The key in the ignition is the only admin key
(there always has to be at least one admin
key).
The remote control is not situated correctly by
the backup slot (vehicles with keyless start).
The key in the ignition does not have admin
privileges.
32
Potential Causes