BMW R 1200 GS Rider's Manual page 84

If symbols should not be shown
5
and warning lights not displayed:
Some malfunctions cannot
82
be indicated if one of the
warning lights fails to show.
Make sure that all the warning
and telltale lights come on in the
pre-ride check.
Have the fault rectified as
z
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS self-diagnosis
BMW Motorrad Integral ABS per-
forms self-diagnosis to ensure its
operability. Self-diagnosis starts
automatically when you switch on
the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
The ABS warning light
flashes.
Phase 2
Test of the wheel sensors as
the vehicle pulls away from
rest. The motorcycle must
reach a speed of at least 5 km/
h in order for ABS self-dia-
gnosis to complete.
The ABS warning light
flashes.
ABS self-diagnosis
completed
The ABS warning light goes
out.
If an indicator showing an ABS
fault appears when ABS self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that neither the ABS
function nor the integral brak-
ing function is available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC self-diagnosis
OE
with riding modes
BMW Motorrad ASC performs
self-diagnosis to ensure its op-
erability. Self-diagnosis starts
automatically when you switch on
the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
The ASC warning light
flashes slowly.
Phase 2
Test of the diagnosis-compat-
ible system components while
the motorcycle is on the move.
The motorcycle must reach a