Getting To Know Your Cash Register; Mode Switch - Casio SE-S10 User Manual

Getting to know your cash register

Getting to know your cash register

Mode Switch

CAL X
REG
OFF
RF
PGM
OP
OP key PGM key
Note:
An error is gener-
ated (E01 displayed)
whenever the position
of the Mode Switch is
changed during regis-
tration.
Display
Operator display
%
�*12345&78
!
#
@
! Department Number Display
Anytime you press a department key to register a
unit price, the corresponding department number
appears here.
@ PLU Number Display
Anytime you perform a PLU registration, the cor-
responding PLU number appears here.
# Number of Repeat Display
Anytime you perform "repeat registration" (page
14), the number of repeats appears here.
Note that only one digit is displayed for the num-
ber of repeats.
E
6
The position of the Mode Switch controls the type of operations you
can perform on the cash register. The PROGRAM key (marked PGM)
Z
can be select any Mode Switch setting, while OPERATOR key (marked
OP) can be used to select OFF, REG or CAL only.
OFF
In this position, the power of the cash register is off.
PGM
REG (Register)
This is the position used for registration of normal transactions.
RF (Refund)
This is the position used for registration of refunds.
CAL (Calculator)
This is the position used for calculator mode.
PGM (Programming)
This is the position used to program the cash register to suit the
needs of your store.
X (Read)
This is the position used to produce reports of daily sales totals with-
out clearing the totals.
Z (Reset)
This is the position used to produce reports of daily sales totals. This
setting clears the totals.
$
PGM RF OFF REG CAL X Z
OP key
PGM key ●
●
1
12345&78
2
#
$ Numeric Display
Entered values (unit prices or quantities) and
calculated values (subtotals, totals or change
amount due) are displayed here. The capacity of
the display is 8 digits.
This part of the display can be used to show the
current time or date between registrations (page
40).
% Character Display
In the character programming (P2) mode, it shows
the last entered character.
The total ( T ) or change ( C ) appears when a subtotal,
total, or change is obtained.
In the paper saving mode, it shows * .
● ● ●
● ● ● ● ●
Customer display
4