Selecting The Zone Or Mode; Selecting Or Changing The Zone - Motorola ASTRO XTL 2500 User Manual

Basic Operating Procedures

Selecting the Zone or Mode

A zone is a grouping of modes. A mode is a group of characteristics
such as transmit/receive frequencies, Private-Line™ codes, radio
parameters, and an alphanumeric name.

Selecting or Changing the Zone

Use the Menu Entry ZONE
1 Press the button to scroll to the ZONE softkey.
2 Press the
The display shows the current zone and mode.
3 Press the
4 Press the
zone as the new home (default) zone.
The zone name stops flashing once it is saved.
5 Press the PTT button to begin transmitting on the
displayed zone.
Use the Menu Entry ZNUP or ZNDN
1 Press the button to scroll to the ZNUP or ZNDN softkey.
2 Press and hold the
until the zone you want appears.
Note: Positions of the ZNUP or ZNDN softkey on the display may
differ each time you release the
3 Press the PTT button to begin transmitting on the
displayed zone.
22
button below ZONE.
or until the desired zone is displayed.
or PTT button to save the displayed
button below ZNUP or ZNDN,
button .