Install The Water Inlet Hose - Haier 50FREE-1 User Manual

Install the water inlet hose

1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the
valves can result.
2. Connect the other ends to the water inlet valve .
( As figure 2)
Jointer of the water inlet hose
Jointer of the
water inlet valve
Water absorption cushion
Figure 1
Figure 2
Reserve, remain time digitron
It displays "--" during detecting.
It displays remained reserve time (hour).
It displays total remained time (min).
It displays abnormal symbol in abnormal situation.
(See to Page15)
42L 45L
carpeting Standard
36L 39L Fibre
Save
32L Wool Superfast
29L
22L 26L
14L
18L
Reserve
Lock
The washing machine can detect the laundries
automatically in standard program.
After detection,it will set the water level to suitable value
among 4, 6, 8,and 10 automatically.
You can also set water level by yourself. After the
machine is started, it will not set water level automatically.
You shall push the start/pause button to make new
setting.
If there's water inside the tub, the machine cannot detect
the laundries and will display water level 32L .
If wet laundries are put in, it may display water level 45L .
You must set suitable water level by yourself.
If superfast program is selected, it will display water
level 22L . When water level 18L is reached in water
The digitron displays remain time
filling, it will perform washing while filling water.When
before washing is finished (in minutes)
water level 22L is reached, it will change to normal
Push "reserve" button, the digitron
washing.
displays the reserve time of washing During operation of wash and rinse program, you can
push down the water level button to add water. When
(in hours). The indicator flashes to
you release the button, or it reaches the overflow water
indicate that the reserve function
level, the machine will stop adding water.
is operating.
The water level decided may be different from actual
Push "reserve" button to display
value because of the different moisture level of the
the reserve mode. laundries.
"Power" button
Push the "power" button to switch on the power.
Under power-on mode, push it to switch off the power.
Push the "power" button to switch on the power. If
the "start/pause" button is not pushed, the machine
will switch off the power automatically after 5 minutes.
Air dry
Dry button
"Air-
Push the "air- ry"
"air- ry"indicator light d
means the "air- ry"program is
chosen. The purpose is drying
laundrie at the same time can
dry the outer tub and the inner tub ,
which can avoid growing mildew
on the outer tub and the inner tub.
The max drying capacity of the fibre
laundrie is 1.5 kg.
Following full-auto program is available
Program
Standard Common washing
Save
washing for light-soil saving laundriesl
Superfast
Washing for light-soil
washing for carpet or heavy thickness
Carpeting and damnify large laundries--usually
under 3kg
Fibre
washing for fibre laundries
For silk textiles slap-up laundries
Wool
usually under 2.5kg
Remark:
If you want to wash wool
laundries ,please select wool program
"
d button ,then the
is on, that
d
Application
a few laundries
silk or other top grade