Adding Computers To Your Network - Belkin N300 User Manual

gETTing sTaRTED

adding Computers to Your network

Wireless devices such as computers, network printers, and gaming
systems can connect to your Router with a few simple steps .
Manual setup
If you know what sort of Internet service you have,
you might try a manual setup . For this you will need a
Wi-Fi-enabled smartphone, tablet, or computer .
Wirelessly Connect to Your Router
the default network name and password are
printed on the foot of the Router .
use your computer, tablet, or smartphone to connect to
the wireless network shown on the network ID card .
When requested, please enter the password
(security key) provided on the card .
Using the WPs button
Start WPS Push Button Connection (WPS PBC) on your computer or
other Wi-Fi device that you would like to connect wirelessly to your
Router . often there will be a button for this purpose in software that
came with the device, or a physical "WPS" button on the device itself .
Within two minutes, press the WPS button on your Router .
the WPS indicator will blink green while it listens for your
Wi-Fi device . once a connection is established, the light
will turn green for about 5 minutes and then go out . If a
connection is not established, the light will blink green
for 30s . You may repeat the process to try again .
You can repeat this process for each WPS-enabled
device you'd like to add to your network .
5