Restoring Your Router To Factory Defaults - Belkin N300 User Manual

Using YOUR ROUTER

Restoring Your Router to factory Defaults

Resetting the Router will restore the Router's normal operation
while maintaining the programmed settings . Reset the Router
in rare cases when the Router may function improperly .
Using the Reset button
use the restore option in instances where you may have forgotten
your custom password or when the Router may function improperly .
Push and hold the "Reset" button for 8-10 seconds, and then
release it . the LAn light on the Router will momentarily flash
and the WLAn light will turn out . When the LAn and WLAn
lights become solid green again, the reset is complete .
Restoring the Router to Default settings Using the Web interface
You can also restore the factory defaults using the web interface .
this may be because the Router is not performing as expected
or you wish to remove all previously configured settings .
setup steps
Click on "Restore Factory Defaults" in the left-
hand column under the "utilities" heading .
28