Recalling A Memory Position; Recalling A Memory Position With The Remote Control - Ford TAURUS 2013 Owner's Manual

Recalling a memory position

A programmed memory position can be recalled:
• in any gearshift position if the ignition is not on.
• only in position P or N if the ignition is on.
Press the desired memory control to recall a memory position.

Recalling a memory position with the remote control

The memory positions are also recalled when you press unlock on your
remote control (if the transmitter is programmed to a memory position)
or, when you enter a valid personal entry code that is programmed to a
memory position. If the easy entry feature is enabled, the seat will first
move to the easy entry position. The seat will move to the final position
when the key is in the ignition or when the push button start system is
put in accessory mode/started.
To program the memory feature to a remote control, see the Keys and
remote control chapter.
Easy Entry and Exit Feature (If Equipped)
This feature automatically moves the driver's seat rearward 2 inches
(5 centimeters) when:
• the transmission is in position N or P
• the key is removed from the ignition or the push button start system
(if equipped) is switched off.
The seat will move to the original position when:
• the transmission is in position N or P
• the key is placed in the ignition or when the push button start system
(if equipped) is put in accessory mode or started.
The easy entry feature can be turned off or on through the information
display.
2013 Taurus
Owners Guide gf, 3rd Printing, December 2012
USA (fus)
Seats 169