Jet Cool/Heat Operation; Neo Plasma Purification Or Neo Plasma + Ion Operation (Optional); Auto Clean (Optional) - LG Air Conditioner Owner's Manual

Jet Cool/Heat Operation

You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or INIDOOR FAN
SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.
NOTE
• Jet cool function cannot be activated during heating or auto changeover operations.
• In case of Inverter, Art Cool and Art Cool Wide(non-Deluxe) model, you can use jet heat function by pressing JET COOL
BUTTON for heating operation.
• Art Cool and Art Cool Wide models close the side discharges during jet cool/heat operation, for strong cooling and heating.

NEO PLASMA Purification or NEO Plasma + Ion Operation (Optional)

Plasma purification or plasma + ion generation can be started by pressing the PLASMA
BUTTON on the remote controller. Repressing it will deactivate the operation.
NOTE
This feature can be used in any operation mode and any fan speed can be used while
plasma filter is functioning.
❏ If NEO plasma plasma + ion generation function operates normally, blue and orange
light appear at the sub display (Optional)

Auto Clean (Optional)

❏ During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification
operation can be removed.
1. Press the AUTO CLEAN BUTTON to activate this function.
AUTO CLEAN
2. Now whenever the unit is turned off, the indoor fan is still running for about 30 minutes
internally without cooling or dehumidification operation. Also the louver is closed.
3. This dries up any remains of moisture & cleans the unit internally.
4. If you press AUTO CLEAN BUTTON again during operation, this function is cancelled.
NOTE
❏ During auto clean function, only START/STOP BUTTON, PLASMA BUTTON and AUTO CLEAN BUTTON
can be used.
❏ If auto cleaner operates normally, green light appears at the sub display (Optional)
Jet cool function can be used to cool the room quickly in hot summer. When this
function is turned on, the air conditioner runs in cooling operation mode with super high
fan speed and 18°C setting temperature for 30 minutes for fast and effective cooling.
Similarly, jet heat function (available only in some models) warms up the room quickly by
operating at super high fan speed and 30°C setting temperature for 60 minutes.
Plasma filter is a technology developed by LG to get rid of microscopic contaminants
in the intake air by generating a plasma of high charge electrons. This plasma kills
and destroys the contaminants completely to provide clean and hygienic air.
Ionizer generates the ion for healthy. Ion stabilizes user's mind and it does good to
respiratory.
Operating Instructions
Blue Green Orange
Blue Green Orange
Owner's Manual 13