Digital Radio Settings - PURE flow Owner's Manual

Digital radio settings

Autotune
Station order
Trim station list
Digital radio settings
These settings are only available when listening to Digital radio Tap Options, then select
radio settings.
Autotune
Search for new digital radio stations and remove inactive stations. You can stop an autotune before
it has finished by tapping Cancel. When an autotune has finished your radio will tune to the last
station you listened to.
Station order
Change the order in which digital radio stations are displayed:
Alphanumeric Alphanumeric order (0-9, then A-Z).
Active station Stations that are active (currently broadcasting) appear at the top of the
station list.
Multiplex Displays stations in groups according to their Multiplex (a group of national or
local stations broadcast by the same operator).
Trim station list
Quickly remove inactive stations (marked with ?) from the station list.
Dynamic Range Control
Change the Dynamic Range Control (DRC) settings. DRC makes the quieter sounds in a digital
broadcast easier to hear at a low volume or in a noisy environment.
Off (default) Any DRC broadcast sent by the station is ignored
Half DRC level is set to half that sent with the broadcast
Full DRC level is applied as sent with the broadcast
Please note that not all stations broadcast DRC information.
Digital
13