Connection To Cable Receiver Or Satellite Box; Plug In The Ac Power Cord - Emerson LD320EM2 Owner's Manual

12
Connection to Cable Receiver or
Satellite Box
Use an HDMI or Component Video cables to connect the
HDMI or the Component Video Input jacks of the unit to the
HDMI or the Component Video output jacks of the cable
receiver / satellite box.
If you connect to the unit's Component Video Input jacks,
connect Analog Audio cables to the Analog Audio L/R Input
jacks for the Component Video connector jacks.
32"
(red / blue / green) and audio cables (red / blue / green) and audio cables
(green) (green) (blue) (blue) (red) (red)
COMPONENT VIDEO OUT AUDIO OUT
Y Pb/Cb Pr/Cr L R
or
STEREO
PCM
cable receiver / cable receiver /
satellite box satellite box
ANT IN
satellite dish satellite dish
RF coaxial cable RF coaxial cable
or
cable TV signal cable TV signal
component video cables component video cables
HDMI OUT
HDMI cable HDMI cable
or
including PPV including PPV
26"
or
component video cables component video cables
(red / blue / green) and audio cables (red / blue / green) and audio cables
HDMI cable HDMI cable
component video component video
cables (red / blue / green) cables (red / blue / green)
and audio cables and audio cables
or
19"
You can also connect this unit to the cable receiver or satellite
box other than the HDMI or the Component Video output jacks
or Composite Video output jack (
might have different output jacks.
Required cables and connecting methods of the cable receiver /
satellite box, or the availability channel for the clear QAM may
differ depending on the cable / satellite provider or local TV
broadcaster.
For more information, please contact your cable / satellite provider
or local TV broadcaster.
Note
• Use an HDMI cable with the HDMI logo (a certifi ed HDMI cable).
High Speed HDMI cable is recommended for the better compatibility.

Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are made.
Caution:
• Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this
range may result in fi re or electrical shocks.
Note
• Each time you plug in the AC power cord, no operations will be
performed for a few seconds. This is not a malfunction.
HDMI cable HDMI cable
(green) (green) (blue) (blue) (red) (red)
STEREO
PCM
ANT IN
cable receiver / cable receiver /
RF coaxial cable RF coaxial cable
satellite box satellite box
(green) (green) (blue) (blue) (red) (red)
satellite dish satellite dish
or
cable TV signal cable TV signal
including PPV including PPV
p. 35, 36) because they
➠