Electrolux EI30BM60MSA Installation Instructions Manual page 5

Installation Instructions
TOOLS YOU WILL NEED
# 1 Phillips screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safetygoggles
TTTI
Pencil
Scissors
(to cut template, if necessary)
dm==-
Saw (saber, hole or keyhole)
Ruler or tape measure and
t edge
L_
Electric drill with s/16", 1 /2" and %"
drill bits
Stud Finder or Hammer (optional)
Level
Carpentersquare
(optional)
Fillerblocksor scrap
wood pieces,if needed
for top cabinetspacing
(usedon recessedbottom
cabinet installationsonly)
Duct and masking tape
MOUNTING SPACE
I
Backsplash
66" (167,6cm)
or MoreFrom
the Floorto the
Topof the
Microwave
BottomEdgeof
CabinetNeedsto
be 30" (76,2cm)
or MoreFromthe
CookingSurface
NOTES:
• The space between the cabinets must be
30" (76.2 cm)wide and free of obstructions.
• If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
• When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
13-3/4"(34.9cm) min.
5