Level Range - Estate TME30101 Installation Instructions Manual

1. Check t hatallparts arenow installed. Ifthere isanextra part,
goback through t hesteps toseewhich step wasskipped.
2. Check t hatyouhave allofyour t ools.
3. Dispose of/recycle allpackaging materials.
4. Check t hattherange i slevel. See "Level Range."
5. Use a mild solution o fliquid household cleaner and warm
water t oremove waxy residue caused b yprotective shipping
material. Dry thoroughly withasoftcloth. F or m ore
information, read the"Range C are" s ection o ftheUse and
Care Guide.
6. Read "Range U se" i ntherange U se andCare Guide.
Electrical Shock
Hazard
Electrically ground range.
Failure to do so can result in death, fire, or
electrical shock.
7. Plug power cord into appropriate outlet. Turn power on.
8. Turn on surface burners and oven. See the Use and Care
Guide for specific instruction on range operation.
If range does not operate, check the following:
• Household fuse is intact and tight; or circuit breaker has not
tripped.
• Range is plugged into an outlet.
• Electrical supply is connected.
• See "Troubleshooting" in the Use and Care Guide.
When the range has been on for 5 minutes, check for heat. If
range is cold, turn off the range and contact a qualified
technician.
Mov ts® g®
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti=tip bracket to rear range foot.
Reconnect the anti=tip bracket, if the range is moved.
Failure to follow these instructions can result in death
or serious burns to children and adults.
When moving range, slide range onto cardboard or hardboard to
avoid damaging the floor covering.
If removing the range is necessary for cleaning or maintenance:
f. Unplug the power supply cord.
2. Slide range forward to complete cleaning or maintenance.
3. Check that anti-tip bracket is installed:
• Look for the anti-tip bracket securely attached to floor.
• Slide range back so rear range foot is under anti-tip
bracket.
4. Check that range is level.