Door Switch - Haier HF-240T Owner's Manual

Basic Operation

Door switch

Functions of the door switch (10)
Warning signal at door opening
Switch of illuminating light
After the freezer is operation, the door
switch is at position 'll' when the appliance
door is opened. At the moment:
the illuminating lamp (12) lights.
when the door has been kept open for
30 seconds or more, the door alarm rings
and the red light twinkles to remind you to
close the door promptly.
After the door is well closed, the door switch
is at position 'l'. At the moment:
the illuminating lamp goes out .
the alarm stops and the red light goes
out. (The red light keeps twinkling if the
inner temperature is not cold enough.)
Note: It's advisable not to adjust the
door switch (10) to position '0',
otherwise the door switch loses all the
functions mentioned above. At the
moment:
the illuminating lamp doesn't light.
the alarm doesn't ring .
If the door switch is adjusted to position '0'
by mistake, it can be restored to position 'I'
or 'II' by hand. If the stop block (11) doesn't
work when the door is opened or closed,
rotate the screw (13) as illustrated. If
rotated clockwise, the stop block moves
forwards. The stop block moves backwards
when the screw is rotated anti-clockwise.
12
.8.
13
10
11
13