Other Features; Call Park; Directed Call Pickup - NEC D-Term IP-32 User Manual

Other Features

Call Park

This feature allows you to "park" a call until you retrieve it from your own or another
telephone. For example: You receive a call and must go to the file room to look up some
information. You would park the call, get the information needed, and retrieve the parked call
on the telephone in the file room.
Note: A parked call must be retrieved. If the call is not retrieved, it will ring back to the original
extension.
TO PARK A CALL
Press the Transfer key and dial #6. Listen for the service set tone. Your display will indicate
"CALLPARK SET." Hang up.
TO RETRIEVE THE CALL FROM THE ORIGINAL TELEPHONE
Lift the handset and dial #6. You are automatically reconnected with your caller. Your display
will indicate "CALLPARK" and the number.
TO RETRIEVE THE CALL FROM ANOTHER TELEPHONE
Lift the handset and dial *65, followed by the extension number of the telephone where you
parked the call. You are automatically reconnected with the caller. Your display will indicate
"CALLPARK" and the number.

Directed Call Pickup

You may pick up any ringing line from your phone. You do not need to be in a Call Pickup Group
with that line, nor do you need a separate line appearance on your phone.
TO ANSWER A RINGING CALL FROM YOUR PHONE
Lift your handset or press the Speaker key. Dial *8 plus the extension that you wish to pick up.
The call will automatically be answered from your phone.
14