Haier LR47T1 Owner's Manual page 31

Program Recording
Time Retrieving Function:
1. Time retrieving function is designed to play back the program which has been played on
the TV, to perform the operations of Fast Forward, Skip Backward and Pause for pictures
of time retrieving.
2. Please set the time retrieving function before you do it; for more information,
see the Set Option under the USB channel. " "
3. This function can only be applied to the TV and AV modes.
4. The channel change and the mode switch operation can not be performed when the time
retrieving is being implemented; if you need to do so, please exit the time retrieving
operation firstly.
5. The suggested time for users to utilize such function is 120 hours each month.
6. If you select external connected devices for the time retrieving operation, the system
needs to take about 30 seconds, based on the capacity of storage medium and the quantity
of files and fragments, to initialize the storage device and its file system.
How to set Time Retrieving Function:
Directly press the TIME SHIFT button on the remote controller to start the operation, and
the screen will bounce off the following menu after pressing the switch button:
1 Current Position; 2 Current Program Storage Position; 3 Time Interval
If you need to replay the pictures that have already played, press the ENTER or
on the remote controller until back to the position you want.
Press the button to return to the initial position of time retrieving;
Press the button to reach the exact position the TV program is playing;
Press the HELP button to open or close the time retrieving menu.
If you want to exit from the time retrieving, press the TIME SHIFT button or RETURN button
again, and return back to the TV picture that is being played.
28
button