Table of Contents
Advertisement
Program Recording
Start Time: the time to start program recording.
Stop Time: the time to stop program recording.
Source: the program source of program recording.
Channel Number: the Channel Number for TV program recording.
On/Off Program Recording: if the option is set On , the TV would be in black screen state
(no sound and no picture) in the process of program recording.
2)If the signal source for program recording is select as AV1/AV2/AV3, the channel for
recording will be grey which means that these options can not be selected.
3)If the recording is being carrying out at the current time, then the button for switch of TV/AV
can not be available.
4)The system will provide a hint window for recording 30 seconds before the timing program
recording starts; at this moment, all buttons except REC or Power button on the remote
controller can no be available. Press REC button to cancel the recording task so as to return
back to the normal state.
5)During the process of normal program recording, the TV/AV button on the TV and remote
controller will not work, then press REC button again to cancel the recording task so as to
return back to the normal state.
Real-time Recording
Method for Real-time Recording: Press REC button on the remote controller directly to start
recording the current TV program you are watching.
1.Connect the USB storage device to the USB program recording port.
2.Press REC button to start the recording.
3.If you want to exit the program recording, please press the REC button on the remote
controller again.
Attentions for Program Recording:
1.If some TV channels have serious interferences or weak signal, these will influence the
effect of recording, and may make the recorded program to not be played normally.
2.For the purpose of ensuring normal use of recording and time retrieving functions of the
streaming media system, please use these two functions 30 seconds after the TV is
turned on.
3.For the purpose of ensuring the integrality and consistency of program recording, it is
suggested that the maximum recording time of one task should not be more than four
hours.
4.Actual recording quality is related to the USB device selected, if using non-standard
USB devices for recording, there would be mosaic and other similar phenomena on
the picture.
5.If the system does not respond or has deadlock, please cut off the power and then turn
on the TV.
6.Mode switches are not available in the process of recording, such as from TV to AV.
7.Since the self-problems of some kinds of hard disk, there would be sporadic picture
flares when playing the recorded program; that is normal.
8.For the purpose of protecting external mobile devices, please connect them after turning
on the TV, otherwise the devices may not be recognized.
9.If the system bounces off a hint of
please make sure that the disk has 300M spare space at least; and if the system still
bounces off such hint, that may be the file error in the disk's boot sector, so please format
the disk and then start to record.
10.Before turning off the TV, please exit from the recording state; and if you turn off the TV
without exiting from the recording state, there would be garbage files in the connected
disk; however, this is a normal phenomenon, and these garbage files can be deleted.
"
"
"
Not Enough Disk Space
"
in the process of recording,
27
Advertisement
Table of Contents
