Haier LEC19B1320 Owner's Manual page 19

MENU OPERATION
Press the SETUP button on the remote control, the
SETUP MENU will be displayed. After accessing the
setup menu, press the direction buttons for up and
down movement to select an item desired, and press
RIGHT direction button to select the SUBMENU
item. Then press the ENTER/OK button to confirm.
Press LEFT direction button return to the menu of
upper level. To exit the setup, press the SETUP button
again. In the SETUP MENU, you may choose any of
the following options as you like.
LANGUAGE SETUP
Select Language in the setup menu, and display the
Language submenu:
OSD Language
Use this item to select the desired
setup menu and screen display.
Subtitle
This option provides the preset subtitle language.
MPEG4 Subtitle(optional)
Select different MPEG4 subtitle encoding option.
Note: Not all players support this item.
Audio
Select the built-in disc dubbing language options.
DVD Menu
This option provides the film's menu language
options.
VIDEO SETUP
Select Video in the setup menu, and display the
submenu:
Video
SYSTEM SETUP
Aspect Ratio
Select the aspect ratio.
Notes:
The image display ratio is related to the recorded disc
format. Some disc can not display images in the
aspect ratio you choose. If you play a disc recorded in
4:3 format on a wide screen TV, black bars will
appear on the left and right side of the screen. You
must adjust the screen setting depending on the type
of the television you have.
TV System
Select the different TV system.
Note: The DVD player setting should be matched to
your TV set.
refer to the instructions or your TV set.
language for the
Parental Control
Set the parental control feature of the player
Note
Control.
Set Password
Input four digits (password), then press
/Ok
Note:
universal password 6666 to unlock.
MISC SETUP
Select
the submenu:
-18-
DVD OPERATION
For more information of output format,
RATING SETUP
Select in the setup menu, and display
Rating
the Rating submenu:
: Password is needed before setting Parental
to confirm.
If you forget your password, please use the
in the setup menu, and display
MISC
Use Default Settings
Reset setup data to factory default value.
ENTER