Haier LEC19B1320 Owner's Manual page 15

3.4 Menu Settings
You can adjust Menu Settings here.
Press to select, press to adjust, press MENU
to exit.
<
Menu Language
Adjust Select
3.5 VGA Settings: Only available in VGA (PC input)
mode.
Press to select VGA Settings, press , and the screen
shown below will be displayed.
H-pos
V-pos
Clock
Phase
Auto
Adjust
Select
1). H-Pos: Adjust the horizontal position of the screen.
2). V-Pos: Adjust the vertical position of the screen.
3). Clock: Fine tune the screen width.
4). Phase: Fine tune the phase of the screen. Usually
you don't need to adjust this item
5). Auto: Auto adjust to fit the screen.
4. Channel MENU
Here you add/skip TV channels and customize displayed
channel info.
Press to select, press
<
Air/cable
Auto Scan
Favorite
Show/Hide
<
Channel NO.
Channel Lable .
DTV signal:
Adjust
Select
1). Air/Cable: Select Air TV signal or Cable TV signal.
2). Auto Scan:
>
English
Menu Exit
50
50
50
50
>
Menu Exit
3). Favorite: Press
4). Show/Hide: Press the ENTER button to display or
option .
5). Channel NO. : Display the current channel number.
6). Channel label: Press
7). DTV signal: Display DTV signal strength.
to adjust.
>
Air
>
>
>
>
2-1
>
Good
Menu Exit
-14-
If it's the first time using the TV, you
should perform a full channel scan in order to capture
and store all available channels.
Press the to confirm , and the screen
will be displayed.
Are you sure?
NO YES
Press E NTER K ey To Select
Adjust
Select
Select "YES" and press the ENTER
and the screen shown below will be displayed,
which indicates that the auto search is progressing.
RF CH: 4
Found: 4
Analog: 1
Digital: 3
Adjust Select
to add /delete favorite channels.
hide channels.
Press to change the channel.
to edit the current channel
name.
Signal strength indicator is for reference only, it
cannot be selected or adjusted.
OPERATION
shown below
Menu Exit
to confirm,
Menu Exit