corresponding letterdesignation.
See figure "Burners
Caps" on page 7.
•
Place burner cap gently on top of base so that the
prongs of the burner base fit snugly into the groove of
the burner cap.
Burner Base
,Matching
letter
"- designation.
Burner Cap
Checking Burner Cap Placement
Check to make sure there is not gap between the
burner cap and burner base. See figure "Bumer Cap
Placement" on page 7 to see the correct and incorrect
placements of the burner cap.
Figure 9: Burners Caps
You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Correct Burner Cap Placement
Incorrect Burner Cap Placement
Figure 10: Burner Cap Placement
English 7