D-Link DSL-2500U User Manual page 28

DSL-2500U ADSL2/2+ Router
User Manual
Parameter
Keep Alive
Dial on demand
PPP IP extension
Use Static IP Address
PPP debug
PPPoE pass through
Click the Next button to continue.
If needed, change the connection settings available in the Miscellaneous section.
Select the checkbox if you want the router to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the LCP interval
and LCP fails fields are available. Specify the required values.
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the Maximum idle time field, specify
a period of inactivity (in seconds) after which the connection should
be terminated.
This option is used by some ISPs. Contact your ISP to clarify if this
checkbox needs to be enabled.
Select the checkbox if you want to use a static IP address to access
the Internet. In the Static IP Address field displayed when the
checkbox is selected, specify a static IP address.
Select the checkbox if you want to log
debugging.
Displayed for the PPPoE type only.
Select the checkbox if you want to allow PPPoE clients of
computers from your LAN to connect to the Internet through this
PPPoE connection of the router.
Figure 23. Configuring PPPoE WAN connection.
Page 28 of 82
Configuring via Web-based Interface
Description
keep you connected to
all data on PPP connection