Starting Up For The First Time; Charging The Ebook Reader Pyrus Maxi; Switching The Ebook Reader On And Off - TrekStor Pyrus maxi User Manual

4 gb

Hide thumbs Also See for Pyrus maxi:

Table of Contents

Starting up for the first time

You must charge eBook Reader before initial use and when the battery is running

low.

7.1

Once you have connected your TrekStor eBook Reader Pyrus maxi via the included

micro USB cable to a computer or to a socket using a suitable power supply (e. g.

TrekStor USB-Charger e.fs), it is automatically charged. After 3 hours with USB power

adapter (5 hours over PC), the battery will be fully charged and the charging will stop

automatically to prevent overcharging.

i Note: During charging, the status LED lights up. Once charging is completed, the

status LED turns off.

i Note: The maximum battery life is reached after about 10 battery charging cycles.

Thanks to the intelligent power saving management of the eBook Reader Pyrus maxi

you will be able to read for weeks with only one battery charge. Under "Settings" you

can additionally adjust the power saving setting to your personal reading behavior.

Please note that this can affect battery life.

If the eBook Reader is turned on, the battery status is shown on the upper right

corner of the display.

7.2

Slide the power switch ä to the right and hold for 3 seconds. Wait a few seconds for

the home screen.

i Note: In case the eBook Reader does not turn on, it has to be charged.

i Note: When starting the unit for the first time, please choose your language, set the

date and time.

Besides the date and battery status, last called up books are displayed to the left and

the books recently transferred to the Reader are displayed to the right on the home

screen. Below you will find the menu bar, and the options to call up other titles. Via

the navigation point "L

" you can also access your eBook collection.

IBRARY

Table of Contents