Jenn-Air CCG2423 Installation Manual page 7

CONVERTINGAPPLIANCE FOR USE
WITH LP GAS
WARNING
Propaneconversionisto be performed by a JENN-AIRAUTHORIZED
SERVICER (or other qualified agency) in accordance with the
manufacturer'sinstructionsand all codes and requirementsof the
authorityhavingjurisdiction.Failureto followinstructions couldresultin
seriousinjuryor property damage, T he qualifiedagencyperforming this
workassumesresponsibility for this conversion.
WARNING
Electrical power and gas must be turned off prior to
conversion.
This appliancewas adjustedat the factory for use with naturalgas. To
convertit for use with LP gas (propaneor butane),eachof the following
modificationsmust be performed:
A. Replaceall orifice spuds
Step 1: Removethe gratesand burnerheads.
Step2: Removealuminumventuritube.
Step3: Trim a small pieceof maskingtapeto the size of a dimeand
affixit overthe end of a 5/16" nutdriver.
Step4: Firmlypress the nutdriver overthe orifice spud(figure 7) and
loosen spud by turning counterclockwise. Carefully lift nut
driver outof burner throat.Orificespudshouldbe captured in
the recess. R epeatthis step foreachburner.
REMOVAL OF ORIFICE SPUD
ALI_MH',IUM VENTURI _/_ 5,/16"NUT DRIVER
7" ICNITER
FIGURE7
Step5: Locatethe LPorificespudpackettapedto the undersideofthe
burner box. The spuds havesmall numbersstampedon the
side. This numbercodes the orifice diameterand its correct
burner location.The following illustrationsshow correct LP
orifice spud location for 4 burner and 5 burner models,
respectively.
INSTALLATIONOF LP ORIFICE SPUDS
4 BURNER MODEL (30" WIDE)
OO
OO
FIGURE8
5 BURNER MODEL (36" WIDE)
©©©
O O
A_T #9219 991-0
FIGURE9
Step 6: With the maskingtape still in place in the recessof the nut
driver, press an LP orifice spud into the recessso that it is
snuglycaptured.
Step 7: Carefullyinstalltheorificespudin theappropriateburner throat
byturningclockwiseto tighten.Tightento a torqueof 15to 20
inch-lbs,
Step 8: Replacecylindricalaluminum venturitubes, Replaceburner
headsand grates,Index eachgrateto its burnerpan,
Step 9: Savethe orificesremovedfrom the appliancefor future use.