Vertex Standard VX-920 Series Operating Manual page 21

F -M S
OLLOW E CAN
The "Follow-Me" Scan feature checks a User-assigned
Priority Channel regularly as you scan other chan-
nels. Thus, if only Channels 1, 3, and 5 (of the 8
available channels) are designated for "Scanning,"
the user may nonetheless assign Channel 2 as the
"User-assigned" Priority Channel via the "Follow-
Me" feature.
To activate "Follow-Me" scanning, first select the
channel you want to designate as the "User-Assigned
Priority Channel" and press the assigned program-
mable key, or set the toggle switch to the assigned
position. Then rotate the CH Selector knob to recall
to the "Scanning Start" channel which has been pro-
grammed by your dealer to activate the scanner.
When the scanner stops on an "Active" channel, the
User-assigned Priority Channel will automatically be
checked every few seconds; if activity is found on
the User-assigned Priority Channel, the radio will
switch between it and the Dealer-Assigned Priority
Channel, if any.
VX-920/-970 S O
ERIES PERATING
A O
DVANCED PERATION
F
To set up a "Dual Watch" frequency pair using the
"Follow-Me" feature, select a channel using the CH
Selector knob. Now press the assigned programmable
key; pressing the assigned programmable key locks
the current channel as the User-assigned Priority
Channel. Now rotate the CH Selector knob to select
another channel (not the "Scanning Start" channel).
Your radio will now switch back-and-forth between
the currently-selected channel and the User-assigned
Priority Channel.
During "Follow-Me" scanning (after you have pressed
the key), you can set up the "Dual Watch" feature
by rotating the CH Selector knob to another channel.
The radio will then scan back and forth between the
original User-assigned Priority Channel and the
newly-selected channel.
The Priority Channel you have assigned (before press-
ing the key) will be retained in memory until you
change it.
M
ANUAL
-M D W
OLLOW E UAL ATCH
19