4-Wire Cord Connections - Haier CGDE700AW User Manual

English

4-Wire Cord Connections

Green Ground
Screw
Green Neutral
Ground Wire
Red
Power Cord
1. Remove the screws securing the terminal block access cover and the strain
relief mounting bracket located on the back of the dryer upper corner.
2. Install a UL approved strain relief into the power cord entry hole of the
mounting bracket . Finger tighten the nut only at this time.
3. Remove the green neutral ground wire from the green ground screw located
above the terminal block.
Typical Conductor
Receptacle
Typical 4
Conductor Cord
11
Green Power Cord
Ground Wire
Strain Relief
Mounting Bracket
Brass Terminal
Block
Terminal
Black
Tighten Nut to
These Threads
Nut
Black 240V
White Neutral
Red 240V
Green Ground