Table of Contents
Advertisement
STEP 3:
PREPARE
THE VENTING
BLOWER
ROOF VENTED
INSTALLATION:
1. Remove one blower unit mounting screw and
two blower plate screws. Remove the blower
plate from cabinet. See Figure 18.
blower plate
mounting
screws
2. Carefully lift the blower unit out of the
microwave
oveR.
3. Rotate blower unit 90 ° so the exhaust ports
face the top of the cabinet. See Figure 19.
4. Place blower unit back into microwave oven.
5,
Use side cutters or tin snips to cut and remove
knockouts "A" from blower plate. Discard
knockouts. Be careful not to distort the plate.
See Figure 20.
6.
Reattach blower plate to microwave oven.
Attach with the one blower unit mounting
screw and then the two blower plate mounting
screws. See Figure 21.
blower plate
-o_
blower unit
mounting screw
Figure 18
blower
unit
Figure 19
Knockouts "A"
blower plate
Figure
20
blower unit _
_
blower plate
__-_
_
mounJ_ng
blower plate
blower unit
mounting screws
Figure 21
12
Hide quick links:
Advertisement
Table of Contents
