Assembly & Set-Up - Cub Cadet SC 500 ez Operator's Manual

Assembly & Set-Up
Contents of Carton
• One Lawn Mower
• One Lawn Mower Operator's Manual •
• One Fuse†
† If Equipped
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up with gasoline and oil as instructed in the accompanying
engine manual BEFORE operating your mower.
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. Remove star knobs and carriage bolts from handle
as shown in Figure 3-1. Do not loosen or remove
adjacent hex head screws.
A
Figure 3-1
b. While stabilizing mower so it doesn't move, pivot
upper handle up as shown in Figure 3-2. Do not
crimp cables while lifting the handle up and make
sure they go on the outside of the handle.
• One Grass Catcher
One Engine Operator's Manual
A
2. Remove the T-bolts from the handle brackets as shown in
Figure 3-3.
• One Bottle of Oil
• One Side Discharge Chute
b
Figure 3-2
Figure 3-3
3
9